21. Dodecyltrimethylammonium chloride (1231) + Solves the problem of poor antistatic properties of inks and easy dust adsorption during printing.
22. Polyoxyethylene nonylphenol ether phosphate (NPEP-8) + Solves the problem of poor alcohol resistance of inks and easy blurring of images after wiping.
23. Sodium dihexyl sulfosuccinate (DHS) + Solves the problem of water-based inks penetrating too quickly on kraft paper and blurring of images.
24. Polyethylene glycol distearate (PEG-600DS) + Solves the problem of low gloss and rough surface after ink film formation.
25. Cocamidopropylamine oxide (CAO) + Solves the problem of poor stability and easy delamination of inks in hard water environments.
26. Polyoxyethylene octylphenol ether (TX-10) + Solves the problem of insufficient wettability of inks on aluminum foil substrates and easy peeling of ink layers.
27. Maleic anhydride-acrylic acid copolymer sodium salt + Solves the problems of rapid pigment settling and short shelf life in inks.
28. Potassium perfluorobutyl sulfonate + Solves the problems of poor chemical corrosion resistance and easy solvent dissolution in specialty inks.
29. Polyoxyethylene fatty acid amide (CDEA) + Solves the problems of insufficient ink foam stability and uneven ink layer thickness during printing.
30. Lauryl alcohol polyoxyethylene ether (AEO-7) + Solves the problems of discontinuous ink transfer and broken lines during high-speed printing.
31. Polyquaternium salt-39 + Solves the problems of poor anti-blocking properties of printed inks and easy smudging during stacking.
32. Phosphate ester polyoxyethylene ether (PPE-10) + Solves the problems of weak adhesion of ink to nylon substrates and easy ink removal after boiling in water.
33. Sorbitan Monooleate (Span-80) + Solves the problem of poor compatibility and particle formation between oil-based inks and water-based binders.
34. Polyoxyethylene Polyoxypropylene Ether (P65) + Solves the problem of ink gloss being affected after adding defoamers to inks.
35. Sodium α-sulfonyl fatty acid methyl ester (MES) + Solves the problem of poor biodegradability and failure to meet environmental standards in inks.
36. Hydroxyethyl Cellulose (HEC) + Solves the problem of insufficient thixotropy in water-based inks and dot distortion during printing.
37. Polyoxyethylene cocoamine (C-12) + Solves the problem of poor salt spray resistance and easy rust spots in inks on metal substrates.
38. Acetylene glycol propoxylate + Solves the problem of ink streaks and unsightly appearance in high-precision printing.
39. Polyglycerol-6 oleate + Solves the problem of poor stability of natural ink emulsifiers and easy demulsification of the system.
40. Styrene-maleic anhydride copolymer ammonium salt (SMA) + Solves the problem of insufficient scratch resistance and easy damage of inks on plastic films.
Main Functions of Hydroxyethyl Cellulose (HEC) in Printing Inks
1. Rheological Property Modulation
2. Pigment Dispersion Stabilization
3. Film-forming and Water Resistance Enhancement
4. Compatibility and Stability Advantages
Recommended Model：
HEC-MES100H
HEC-150HM
